Supporto motori
-
Vibration absorber,M5
The vibration absorbers are used wherever vibrations have to be decoupled from the model. They reduce the vibration stress to which the model is exposed; in turn, noise/sound transmission is also reduced. For the purpose of attachment, simply drill a hole of the appropriate diameter in the front bulkhead, for example, insert the vibration absorber until the collar sits flush and screw the motor bracket tight. The retaining screw also needs to be secured with UHU screwlock. Per saperne di più€ 17,59 -
Motorträger 10-15ccmMotor
For motor OS MAX FX 61, OS MAX FX 91, OS MAX LA 65, OS MAX FS 70 and OS MAX FS 91. Made from stable plastic. With fixings. Per saperne di più€ 14,29 -
Motor mount
For motors with capacities from 4 cm³ to 9 cm³. The two carrier components are screwed to the front bulkhead of the model using the fixings supplied in the kit (the position of the carrier components is determined by the width of the crankshaft housing). The motor is fixed to the arms with the self-tapping screws supplied in the kit. If necessary, the carrier arms can be cut to length. Per saperne di più€ 5,49 -
Engine mount, length19,1 mm
Technical information Weight approx. [g]: 30 Diameter / outer [mm]: 17,5 Per saperne di più€ 26,39 -
Engine mount, length31,8 mm
Technical information Weight approx. [g]: 48 Diameter / outer [mm]: 17,5 Per saperne di più€ 32,99 -
Engine mount, length25,4 mm
Technical information Weight approx. [g]: 40 Diameter / outer [mm]: 17,5 Per saperne di più€ 29,69 -
Engine mount, length50,8 mm
Technical information Weight approx. [g]: 77 Diameter / outer [mm]: 17 Per saperne di più€ 38,49 -
Engine mount, length44,5 mm
Technical information Weight approx. [g]: 67 Diameter / outer [mm]: 17 Per saperne di più€ 36,29 -
Engine mount, length6,4 mm
Technical information Weight approx. [g]: 14 Diameter / outer [mm]: 17,5 Per saperne di più€ 21,99 -
Vibration absorber,M4
The vibration absorbers are used wherever vibrations have to be decoupled from the model. They reduce the vibration stress to which the model is exposed; in turn, noise/sound transmission is also reduced. For the purpose of attachment, simply drill a hole of the appropriate diameter in the front bulkhead, for example, insert the vibration absorber until the collar sits flush and screw the motor bracket tight. The retaining screw also needs to be secured with UHU screwlock. Per saperne di più€ 10,99