Tubi

This valve enables the model to be refuelled quickly and cleanly. Similar to in Formula 1, the refuelling nipple just needs to be inserted and the fuel can begin to flow immediately. When the tank is full, simply disconnect the nipple; there is no need to close off the line with a self-sealing nipple. This is possible because the valve is a shut-off valve in both directions. Another advantage of this is that no fuel can escape from the valve either. Per saperne di più

As order no. 1657, but for connection to a separate tank fill line. Per saperne di più

It is installed in the supply line from the tank to the motor for the purpose of filling the fuel tank. During fuelling the line to the carburettor is interrupted and the tank is filled through the pendulum. When the filling connector is pulled off, the connection between the tank and the motor is re-established and the filler neck is closed pressure-tight. Per saperne di più

Dimensions 27.5 x Ø 10 mm. Connection Ø 4 mm, weight approx. 2.5 g. Three-part housing unit with filter cartridge inserted. The filter can be removed, dismantled and cleaned without the fuel line. The filter cartridge consists of a large, ultra-fine, plastic micro strainer. Per saperne di più

The aluminium self-sealing nipple can be used with virtually all standard fuel lines. Fuel-resistant even when running on petrol. For fuel line with internal Ø of 1.5 to 3 mm. Pack of 5. Per saperne di più

Miscell. parts set Per saperne di più

Technical information Overall length [mm]: 1000 Diameter / outer [mm]: 4,5 Per saperne di più

Technical information Overall length [mm]: 1000 Diameter / outer [mm]: 5 Per saperne di più