Mitermodel vi da il benvenuto nel nostro store online !
(0 item) - € 0,00

Non hai articoli nel carrello.

REGOLATORI DI TENSIONE

Elenco  Griglia 

Articoli da 1 a 10 di 15 totali

Pagina:
  1. 1
  2. 2
per pagina
  • REGOLATORE DI TENSIONE YGE 90 HV SB005

    REGOLATORE DI TENSIONE YGE 90 HV SB005

    YGE 90 HV electronic speed controller •90A continuous with good cooling •4 bis 12s LiPos with automatic detection, undervoltage feedback. •12 to 36 cells NiMh •Undervoltage feedback disableable. •Opto coupler •Governor-Mode •Soft start •Infinitely adjustable F3A brake •Active freewheel, for efficient partial load handling •Automatic Timing or in 6 setting choices •Electronic brake with 3 settings •8-16 kHz •Max RPM: 240.000 (2-Pole) •Over temp notification •Integrated anti-spark •Dimensions: 67 x 31 x 19 mm •Weight 53g without cables, 79g with •Programming with ProgCard II Per saperne di più
    € 229,00

  • SCHEDA DI PROGRAMMAZIONE HOBBYWING SB074

    SCHEDA DI PROGRAMMAZIONE HOBBYWING SB074

    Multifunction LCD Program Box 1 Working Modes 1.1 Works as an individual device to set the ESC, the value of each parameter is displayed on the LCD screen. 1.2 Works as an USB adapter to link the ESC with a PC to update the firmware of the ESC or set the ESC by HOBBYWING USB LINK SOFTWARE . 1.3 Works as a Lipo battery voltmeter to measure the voltage of the whole battery pack or each cell. Per saperne di più
    € 35,00

  • REGOLATORE DI TENSIONE YGE 90 LV SB048

    REGOLATORE DI TENSIONE YGE 90 LV SB048

    •90A continuous with good cooling •2 to 6s LiPos with automatic detection, undervoltage feedback. •6 to 18 cells NiMh •Undervoltage feedback disableable. •Switching BEC 5,5V / 7,4V / 8V, 6A continuous, 12A Peak, jumper settable •Governor-Mode •Soft start •Infinitely adjustable F3A brake •Active freewheel, for efficient partial load handling •Automatic Timing or in 6 setting choices •Electronic brake with 3 settings •8-16 kHz •Max RPM: 240.000 (2-Pole) •Over temp notification •Integrated anti-spark •Dimensions: 64 x 32 x 13 mm •Weight 52g without cables, 82g with •Programming with ProgCard Per saperne di più
    € 168,00

  • REGOLATORE DI TENSIONE YGE 60 LV SB047

    REGOLATORE DI TENSIONE YGE 60 LV SB047

    YGE60 60A Brushless controller YGE top class ESC for Goblin 380. German engineering and quality. Per saperne di più
    € 130,00

  • KONTRONIK REGOLATORE DI TENSIONE KOBY 90 LV SB044

    KONTRONIK REGOLATORE DI TENSIONE KOBY 90 LV SB044

    Item Description Kontronik KOBY 90A ESC with BEC - 4910 The KOBY series is the latest generation of KONTRONIK brushless ESCs. Following the successful JAZZ series, the KOBY guarantees the highest performance with the familiar KONTRONIK reliability. KOBY ESCs feature a powerful 3 A continuous current BEC that can easily handle peaks of up to 10 A. The output voltage of the synchronized BEC is adjustable from 5.6 V to 8 V. This allows for powerful supply of servos of the latest generation. Easy operation of the KOBY is guaranteed by the familiar standardized KONTRONIK mode programming. Set up is nearly plug & play with most important general parameters preset in selectable glider mode, motor mode and heli mode. Of course the KOBY comes equipped with the legendary KONTRONIK sensitive RPM control. One of the innovative aspects of KOBY ESCs is their online update ability (OUF). The new KONTRONIK PROGDISC is not only the programming unit for ESCs; it is also the PC interface for online-updating KONTRONIK ESC software. Per saperne di più
    € 197,00

  • KONTRONIK REGOLATORE DI TENSIONEJIVE 80 LV SB043

    KONTRONIK REGOLATORE DI TENSIONEJIVE 80 LV SB043

    Kontronik Jive 80+ LV ESC Overview: The Jive Series of ESCs offer integrated shock resistant housing made from a specific poly amide protects the JIVE ESC from mechanical damage and makes it waterproof. The plastic material has been developed especially for injection molding of electronic parts without tensions or stress for the electronic components The name 80+ LV means that the Jive is capable of putting out 80 Amps continuous current right out of the box with zero modification. The huge cooling plate transfers all of the heat from the internals with great efficiency. With decent external cooling it is possible to increase the output of the Jive considerably. Installing a heatsink onto the Jive's built-in cooling plate will boost the cooling and help keep it running cool. Kontronik ESC's have a legendary reputation for having the most sophisticated & consistent properties of any ESC on the market. The built-in governor mode is simply the best ESC governor available - As long as your motor and battery are up to the task, a Kontronik ESC will govern the head speed flawlessly. Another amazing feature of Kontronik ESC's is their ability to automatically program themselves to mate with the motor that they are controlling. This guarantees the highest power and efficiency possible all the time, every time. Further highlights are waiting inside the new JIVE ESC. One of which is the unbelievably strong BEC which is adjustable between 5V and 6V with ProgCARD II. It offers 5A continuous BEC current with 15A in peak. That's enough for all spectacular flight figures even in helicopters. To provide this power the JIVE ESCs have two PARALLEL BEC output jacks. It is necessary to use both BEC output jacks if you are using this ESC with high current servos, most specifically in a flybarless application. Due to a second processor it was possible to exceed the well-known JAZZ Software with some new leading features. For example the JIVE alarms the pilot after the flight, when it was used in overload regions in order to prevent a later malfunction. Per saperne di più
    € 347,00

  • KONTRONIK REGOLATORE DI TENSIONE KOBY 70 LV SB042

    KONTRONIK REGOLATORE DI TENSIONE KOBY 70 LV SB042

    Item Description Kontronik KOBY 70A ESC with BEC - 4910 The KOBY series is the latest generation of KONTRONIK brushless ESCs. Following the successful JAZZ series, the KOBY guarantees the highest performance with the familiar KONTRONIK reliability. Per saperne di più
    € 177,00

  • KONTRONIK REGOLATORE DI TENSIONE JIVE 80 HV SB029

    KONTRONIK REGOLATORE DI TENSIONE JIVE 80 HV SB029

    KONTRONIK JIVE 80 HV Speed Controller Features: # Expert class performance. # Programmable modes: different default settings for different model types including glider, airplane, heli, car and boat, reversable rotation and competition. # Ultra-low noise suppression circuitry for super-clean BEC power control to the Rx. # Measures motor inductance and winding resistance and matches power accordingly. # Adjustable soft-start timing. # Custom "partial load capability" design allows for very high efficiency when operating at less than full power (brushless systems are most inefficient when operated at less than full power, which can cause overheating and lower flight times). # Adjustable frequency from 8kHz to ultra-high 32kHz for super smooth control and high effiency operation. # EMF brake with 10 brake strength settings. # Capable of much higher RPMs. # Variable current limiting. # Audible tones and LED for easy setup. Model - Jive 80+ HV Cells Input: - 5-12 LiPo Operating Voltage - 16-50 (V) BEC - Yes BEC Voltage - 5.5 (V) Adjustable with ProgCARD II from 5-6 (V) BEC Cont. Amps - 5 Constant Current - 80A Max. Surge Current - 100A Dimension - 62Lx32Wx15H mm Weight (w/wires) - 84grams Per saperne di più
    € 329,00

  • KONTRONIK KOSMIK 200 SB027

    KONTRONIK KOSMIK 200 SB027

    Kontronik Kosmik 200 HV ESC The KOSMIK delivers sufficient power for the ambitious pilot at the established KONTRONIK reliability. With continuous current of 200A at 5 S to 14 S LiPo brings every model powerfully in motion. The continuous current is defined for a battery capacity of 10,000 mAh. With its integrated and adjustable BEC, the KOSMIK even supports HV servos. Different modes for sailplanes, motorplanes, helicopters, boats and RC cars (including back and forth drive) make the KOSMIK flexible for many applications. Apart from a second helicopter mode with fixed RPM a spool up optimized for scale helicopters is implemented. The scope of delivery includes tailor made motor and battery cables as well as one BEC cable. Optionally available are special KOSMIK heat sinks which guarantee the maximum power of this ESC. BEC One important feature of the KOSMIK is the strongest BEC KONTRONIK has ever developed. With a voltage from 5 V up to 8 V and a current capacity of 7 A continuous and up to 20 A peak the KOSMIK is the ESC for the most demanding tasks. Two BEC ports allow for using full current when using the second BEC cable. Screwed instead of soldered No wires. This is maybe the first thing you notice looking at the new KOSMIK. In order to handle the enormous power the KOSMIK is provided with gold tabs instead of the familiar soldered cables. Before usage cables and tabs are connected via screws and cable shoes. This concept makes exchanging cables easy and forms a reliable high current connection. Data interfaces Therefore the KOSMIK, in addition to three connectors for sensors and telemetry, provides a fast micro USB port in order to give out and process operation data. Mode-Programming The well-known and proven KONTRONIK Mode-Programming is also implemented in the KOSMIK. Thus, the ESC is rapidly deployable and can be customized for different applications within the shortest possible time. PROGDISC Compatible The KOSMIK can be parameterized using the KONTRONIK PROGDISC. This allows to change individual parameters and helps to adjust the KOSMIK to your personal preferences. Online Updatable Of course, the KOSMIK is also updatable online. This allows software updates easily set at home. Long downtimes caused by sending and waiting are a thing of the past. LED Equipped with two bi-colored LEDs the KOSMIK offers a wide range of signal outputs. These can be used for both diagnostic purposes, as well as for programming support. Logger As the first KONTRONIK ESC the KOSMIK offers the possibility of recording operating parameters internally. Internal recording delivers more detailed data than an external system could ever supply. With the high recording capacity and speed KONTRONIK delivers state-of-the-art technology. MicroSD Card All recorded data are written on a MicroSD card. This enables a flexible analysis of a great data volume. Specifications: Cell count (LiPo): 5-14 Operating voltage [V]: 20-58 Continuous current [A]: 200 Maximum RPM with 2-pole-motor: 250,000 Size [mm] (without capacitor): 90x54x29 Weight [g] without cables: 200 BEC current continuous [A]: 7 BEC current maximum [A]: 20 BEC voltage adjustable [V]: 5-8 PWM frequency [kHz]: 8-32 Sensor ports: 3 Features: BEC short circuit protection Auto Programming Mode Stick positions programmable Mode programming PROGDISC ability Online update ability (OUF) RPM control Autorotation mode EMF brake can be adjusted* Proportional brake Short circuit protection False start protection Polarity protection Current limiting Overtemperature protection Undervoltage cutoff Can be disabled with automatic adjustment for cell count: Li-Ion / LiPo / NiCd / NiMh /LiFePo Variable cutoff voltage per cell * Slow down instead of cutoff * Active freewheeling circuit LED status display Overload alarm Reversable rotation direction Data logging Anti spark USB port Per saperne di più
    € 699,00

  • KONTRONIK KOSMIK 200 COOL SB023

    KONTRONIK KOSMIK 200 COOL SB023

    Kontronik Kosmik 200 HV ESC Cool The KOSMIK delivers sufficient power for the ambitious pilot at the established KONTRONIK reliability. With continuous current of 200A at 5 S to 14 S LiPo brings every model powerfully in motion. The continuous current is defined for a battery capacity of 10,000 mAh. With its integrated and adjustable BEC, the KOSMIK even supports HV servos. Different modes for sailplanes, motorplanes, helicopters, boats and RC cars (including back and forth drive) make the KOSMIK flexible for many applications. Apart from a second helicopter mode with fixed RPM a spool up optimized for scale helicopters is implemented. The scope of delivery includes tailor made motor and battery cables as well as one BEC cable. Optionally available are special KOSMIK heat sinks which guarantee the maximum power of this ESC. Per saperne di più
    € 759,00

Elenco  Griglia 

Articoli da 1 a 10 di 15 totali

Pagina:
  1. 1
  2. 2
per pagina