Iscriviti ai Feed RSS
SKYRC TECNOLOGY
-
SKYRC E4 BALANCE CHARGER SK-100055
SKYRC E4 BALANCE CHARGER SKYRC e4 Charger is an economic, high quality 100-240V AC balance charger, designed for charging LiPo and LiFe batteries from 2-4 cells in balance mode. The circuit power is 20W and max charge current can reach to 3A. There are three kinds of charge current 1A/2A/3A that can be selected. You could select the proper charge current according to the battery capacity. Per saperne di più€ 27,49 -
SKYRC E6 BALANCE CHARGER SK-100052
SKYRC E6 BALANCE CHARGER SKYRC e6 Charger is an economic, high quality 100-240V AC balance charger, designed for charging LiPo and LiFe batteries from 2-6 cells in balance mode. The circuit power is 50W and max charge current can reach to 5A. There are four kinds of charge current 1A/2A/4A/5A that can be selected. You could select the proper charge current according to the battery capacity. There is one LED indicating the charge status (ready to charge/charge in CC mode/charge in CV/ mode/charge finish) and six LEDs indicating each battery cell status (charge/discharge). In this case, we could know the charge process at any time easily through the LEDs status. The operation of the charger is also very simple. There are two toggle switches in the charger which can be used to selected battery type and charge current. After you power on the charger, select the battery type and charge current, connect the battery and charger with the balance board, the charger will start working. The features of the charger is as below, Low cost Power supply built in: you could connect the AC power cord to the main AC socket directly. AC Input 100-240V: you could use this charger all over the world and don’ need to worry about any damage caused by improper input voltage. Charge in balance mode: the voltage of each cell will be balanced so that the battery will be performed better and the cycle life will be longer. Per saperne di più€ 46,30 -
SKYRC E6650 BALANCE CHARGER SK-100010
SKYRC E6650 BALANCE CHARGER Optimized operating software e6650 features the so-called AUTO function that set the feeding current during the process of charging or discharging. Especially for Lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user's fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users! Internal independent lithium battery balancer e6650 employs an individual-cell-voltage balancer. It isn’t necessary to connect an external balancer for balance charging. Balancing individual cells battery discharging During the process of discharging, e6650 can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal. Adaptable to various type of lithium battery e6650 is adaptable to various types of Lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries. Fast and storage mode of lithium battery Purposes to charge Lithium battery varies, ‘fast’ charge reduce the duration of charging, whereas ‘store’ state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery. Maximum safety Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically. Automatic charging current limit You can set up the upper limit of the charging current when charging your NiCd or NiMH battery; it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging mode. Capacity limit The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value. Temperature threshold* The battery’s internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated. * This function is available by connecting optional temperature probe, which is not included in our package. Processing time limit: You can also limit the maximum process time to avoid any possible defect. Input power monitoring To protect the car battery used as DC input power from being damaged, its voltage keeps being monitored. If it drops below the lower limit, the process will be ended automatically. Data store/load The maximum five batteries’ data can be stored for users’ convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting. Cyclic charging/discharging 1 to 5 cyclic and continuous process of charge>discharge or discharge>charge is operable for battery refreshing and Balancing to stimulate the battery's activity. Per saperne di più€ 89,01 -
SKYRC QUATTRO B6 80W CHARGER SK-100046
SKYRC QUATTRO B6 80W SKYRC Quattro B6 employs the circuit that features four totally independent but identical power outputs which are powered 80 watts each. Total powers are 320 watts. As a result , it can charge or discharge up to 4 packs of 15 cells of NiCd/NiMH or 4 packs of 6 series of lithium batteries simultaneously. Quattro B6 has four individual cell voltage balancer at each outputs, so it does not required any balancer separately when charging lithium batteries (LiPo/LiIon/LiFe) for voltage balancing. The twin-fan cooling system is so smart and efficiently. The fan speed is controlled by internal temperature sensor. SKYRC Quattro B6 allows you to plug 4 batteries into one charger simultaneously, and it will intelligently and automatically charge all 4 of them at once to their maximum capacity. To top of it, the batteries being charged do not even need to have the same configuration. You can connect different chemistry?Ni-MH/Ni-CD/LiPo/LiFe?batteries into any of the charging ports. No more staying up late for charging batteries. Operating voltage range: DC 11.0-18.0 Volt Four Outputs Circuit power: Max. Charge power 320Watts (4x80Watts) Max. Discharge power 40Watts (4x10Watts) Per saperne di più€ 188,69 -
SKYRC QUATTRO B6AC CHARGER SK-100013
SKYRC QUATTRO B6AC SKYRC QUATTRO B6AC is a high-performance, micro processor control charge/discharge station with battery management suitable for use with all current battery types. With integral equalizer for six-cell Lithium-Ion (LiIon), Lithium-Polymer (LiPo) and Lithium-Ferrum (LiFe) batteries. Maximum 6A charge current; can be powered by a 12 Volt car battery or from the 110V AC(US Version) or 220V AC via the built in switch-mode power supply. And the circuit features four totally independent identical power outputs which are powered 50 watts each. Total powers are 200 watts. As a result , it can charge or discharge up to 4 x 15 cells of NiCd/NiMH or 4 x 6 series of Lithium batteries simultaneously. Quattro B6AC has four individual cell voltage balancer at each outputs, so it does not required any balancer separately when charging Lithium Battery (LiPo/LiIon/LiFe) for voltage balancing. When a Nickel battery is fully charged, the unit terminates the process using the Delta-Peak method. Lithium and lead (Pb) batteries are charged using the CC-CV method. The fan cooling system is so smart and efficient. The fan speed is controlled by internal temperature sensor. Per saperne di più€ 264,84 -
SKYRC 15V 7A AC ADAPTOR SK-200012
SKYRC 15V 7A AC ADAPTOR High performance power supply Built-in Ventilation fan Input: AC 100-240V 50/60HZ 3A Output: DC 15V 7A Dimension: 136*61.3*37mm Per saperne di più€ 37,66 -
Sky-RC NC2500 CHARGER SK-100059-02
Standard Alone Mode Smart Phone Control Mode Charging Current 0.2-2.5A 0.2-2.5A Delta Peak 5mV 3-15mV Discharging Current 0.1-1.0A 0.1-1.0A Discharging Termination Voltage 0.9V 0.5-1.0V Battery Capacity Range 500mAh-3500mAh 500mAh-3500mAh No. of Cycle 1-12 1-12 Top off Charging Current 100mA 100mA Maintenance Charging Current 30mA 30mA Temperature Portection 55℃ 55-70℃ Input Power 12V/2.5A USB Power 5V/1A Weight 370g Dimensions(L*W*H) 154*104*50mm Per saperne di più€ 94,14 -
SKYRC RS16 180W/16A BALANCE CHARGER/DISCHARGER SK-100078-01
KYRC RS16 180W/16A BALANCE CHARGER/DISCHARGER Specification: DC Input Voltage: 11-18V Controls: Joystick Display Type: 2x16 LCD Display Backlight: Blue Case Material: Metal Cooling System: Built-in fan x1pc Case Size: 92x111.4x50mm Weight: 405g PC Communications: USB Port for PC Control & Firmware Upgrade External Port: Balance Socket-XH, Temperature Probe Socket, Battery Socket, DC Input, Micro USB Port for PC. Delta Peak Detection: NiMH/NiCad: 3-15mV/cell Charge Cutoff Temperature: 20-80ºC(adjustable) Charge Voltage: NiMH/NiCad: Delta peak detection LiPo: 4.18-4.3V/cell LiIon: 4.08-4.2V/cell LiFe: 3.58-3.7V/cell Balance Current: 200mA/cell Reading Voltage Range: 0.1-25.8V/cell Battery Types/Cells: LiPo/LiIon/LiFe: 1-6cells NiMH/NiCad: 1-15cells Pb: 2-20V Battery Capacity Range: NiMH/NiCad: 100-50000mAh LiPo/LiIon/LiFe: 100-50000mAh Pb: 100-50000mAh Charge Current: 0.1A-1A (±0.3A) 1A-16A (±10%) Safety Timer: 1-720minutes off Charge Wattage: 180W Discharge Current: 0.1A-8A (±10%) Discharge Cut-off Voltage: NiMH/NiCad: 0.1-1.1V/cell LiPo: 3.0-3.3V/cell LiIon: 2.9—3.2V/cell LiFe: 2.6-2.9V/cell Pb: 1.8V Discharge Wattage: 30W Balance Cells: 6 cells Memory: 10 different charge/discharge profiles Charge Method: CC/CV for lithium types and lead (Pb) batteries, Delta-peak Sensitivity for NiMH/NiCad. Per saperne di più€ 75,33 -
SKYRC 6X80+ BLUE VERSION CHARGER SK-100068-03
Specifications: Input Voltage: AC Input: 100-240V /DC Input: 11-18V Controls: Enter/Start Rotary Dial, Mode/Stop Button Bluetooth: Available Display Type: 63.40*14.54mm LCD screen Display Backlight: Blue PC Communications: USB Port for PC Control & Firmware Upgrade Case Material: Plastic Cooling System: Bult-in, one 30*30*7mm fan Case Size: 135*112*60.9mm Weight: 525g External Port: Temp Sensor, Servo/ESC Port, Brushless Motor Sensor Port, AC Input Power Port, Balance Socket, USB Port for PC Delta Peak Detection: NiCd: 3-15mV/cell NiMH: 3-15mV/cell Trickle Charge: 50-300mA Charge Cutoff Temperature: 20-80°C (adjustable) Charge Voltage: NiCd/NiMH: Delta peak detection LiPo: 4.18-4.3V/cell LiIon: 4.08-4.2V/cell LiFe: 3.58-3.7V/cell Balance Current: 200mA/cell Reading Voltage Range: 0.3-5.0V/cell Battery Types/Cells: NiCd/NiMH: 1-15cells LiPo/LiIon/LiFe: 1-6cells Pb: 2-20V Battery Capacity Range: NiCd/NiMH: 0.1-1.1V/cell LiPo/LiIon/LiFe: 100-50,000mAh Pb: 100-50,000mAh Charge Current: 0.1-10.0A Safety Timer: 1-720 minutes, Off Charge Wattage: AC50W, DC80W Discharge Current: 0.1-5.0A(±10%) Discharge Cut-off Voltage: NiCd/NiMH: 0.1-1.1V/cell LiPo: 3.0-3.3V/cell LiIon: 2.9-3.2V/cell LiFe: 2.6-2.9V/cell Pb: 1.8V Discharge Wattage: 8W Balance Cells: 6 cells Memory: 10 different charge/discharge profiles Charge Method: CC/CV for lithium types and lead (pb) batteries, Delta-peak Sensitivity for NiMH/NiCd. Per saperne di più€ 105,62 -
SKYRC T6755 CHARGER SK-100064-02
Specifications: Input Voltage: AC Input: 100-240V/DC Input: 11-18V Controls: Color LCD Touch Screen Display Type: 65.85*49.63mm graphic touch sensitive LCD 3.2"(320*240 dot) screen and four color theme Display Backlight: White PC Communications: USB Port for PC Control & Firmware Upgrade Case Material: Plastic Cooling System: Built-in, one 40*40*10mm fan Case Size: 140*165*60mm Weight: 540g External Port: Balance Socket-XH, Temperature Probe Socket, DC Input, USB port for PC, AC Input Power Port Delta Peak Detection: NiCd: 3-15mV/cell NiMH: 3-15mV/cell Charge Cutoff Temperature: 20-80°C (adjustable) Charge Voltage: NiCd/NiMH: Delta peak detection LiPo: 4.18-4.3V/cell LiIon: 4.08-4.2V/cell Balance Current: 200mA/cell Reading Voltage Range: 0.3-5.0V/cell Battery Types/Cells: NiCd/NiMH: 1-15cells LiPo/LiIon/LiFe: 1-6cells Pb: 2-20V Battery Capacity Range: NiCd/NiMH: 100-20,000mAh LiPo/LiIon/LiFe: 100-20,000mAh Pb: 100-20,000mAh Charge Current: 0.1-7.0A Safety Timer: 1-720 minutes, Off Charge Wattage: 55W Discharge Current: 0.1-2.0A (±10%) Discharge Cut-off Voltage: NiCd/NiMH: 0.1-1.1V/cell LiPo: 3.0-3.3V/cell LiIon: 2.9-3.2V/cell Discharge Wattage: 5W Balance Cells: 6 cells Memory: 5 different charge/discharge profiles Charge Method: CC/CV for lithium types and lead (pb) batteries, Delta-peak Sensitivity for NiMH/NiCd. Per saperne di più€ 104,75