Mitermodel vi da il benvenuto nel nostro store online !
(0 item) - € 0,00

Non hai articoli nel carrello.

ACCESSORI

Elenco  Griglia 

Articoli da 1 a 10 di 31 totali

Pagina:
  1. 1
  2. 2
  3. 3
  4. 4
per pagina
  • XH adapter SK-600020-04

    XH adapter SK-600020-04

    XH adapter SK-600020-04 JST XH Balancing Board 2-6 cell Per saperne di più
    € 8,63

  • SKYRC WATT METER SK-500005

    SKYRC WATT METER SK-500005

    Specifications: Parameter Range or Value Resolution Voltage 0-60V (*1) 0.01V Current 0-100A peak (*2) 0.01A Power 0-6000W 0.1W Charge 0-65Ah 0.1mAh Energy 0-6554Wh 0.1KWh Temperature 0-150?/32?-302? 1?/1? Auxiliary Power 4.0V-60V Dimensions 51.3*42.9*13.7mm Net Weight 42g/1.48oz Display 26.5*28.5mm LCD (*1).0V minimum with auxiliary power. (*2)50A continuous, 100A peak, assumes device’s wires are in free air and attached to connections at or below temperature of 35 flow. 100A operation time depends on ambient temperature and wiring temperature. You can calibrate all values to zero by pressing “SW” button for more than 3 seconds. Per saperne di più
    € 42,09

  •  SKYRC LIPOPAL SK-500007

    SKYRC LIPOPAL SK-500007

    Applicable Battery Pack: 2-6S LiPo Voltage Display Tolerance: +/-1.5% Voltage Display Resolution: 0.01v Voltage Display Range: 0-5v Balancing Current: 50mA Operating Temperature: 10~+45°C Storage Temperature: -20~+60°C Case Size: 70x38x11mm Weight: 23g Per saperne di più
    € 25,80

  • SKYRC DIGITAL PITCH GAUGE SK-500009

    SKYRC DIGITAL PITCH GAUGE SK-500009

    SKYRC DIGITAL PITCH GAUGE The digital pitch gauge is designed for application in model helicopters and serves to measure the rotor blade pitch value. The built in digital gyroscopic sensor is capable of detecting pitch angle, with result displayed through LCD screen, providing a simple and precise way of measuring pitch angle. FEATURES Large LCD for easy reading Up to 700 mm blades (Suitable for 250 to 700 size helicopters) Fast and accurate measurement Zero function Auto rotating display Auto power-off (Power shuts down after 20 minutes without any movement) Specifications: Body Dimension: 113x56x14mm Suitable blade width: 20mm~75mm Detectable pitch range: ±90° Temperature: 0~40°C Resolution: 0.1° Current consumption: 2.8mA Battery: CR2032 Lithium X2 Weight (including battery): 40g Aluminium blade clamp Per saperne di più
    € 35,61

  • SKYRC POWER SWITCH SK-600054

    SKYRC POWER SWITCH SK-600054

    SKYRC POWER SWITCH SKYRC introduces the POWER SWITCH, a tiny MCU controlled on/off switch for your radio controlled model. A simple push button operates the switch meaning to eliminate theproblems associated with intermittent contact of an ordinary mechanical switch.The sealed unit is plastic and can easily be mounted to the transponder mount of your model or anywhere else you can mount it using double side tape. (Two kinds of bottom covers are included, user can change the bottom cover.) The switch also features a LiPo mode, by turning this on the switch unit will auto detect low LiPo voltage and cut off power to protect your LiPo from over dis-charging. This of course can be turn off if you have other safeguards in place or using NiMH/NiCad battery. Beside that the power switch informs you about the remaining capacity and conditions of your battery pack. SWITCH ON/OFF SETUP 1. NiMH/NiCad Battery Pack For switching on please press and hold the button for one second. The PWR LED will turn on. For switching off please press and hold the button until all LEDs turn off. The PWR LED also shows you the remaining battery capacity when switched on. 2. LiPo Battery Pack For switching on please press and hold the button for more than three second. The PWR LED and LIPO LED will turn on. For switching off please press and hold the button until all LEDs turn off. The PWR LED also shows you the remaining battery capacity when switched on. Specifications: Input Voltage: 4-12V Max. Current: 10 Amp Battery Mode: 1. NiHM / NiCad 2. LiPo Low Voltage Protection: 6.2V(LiPo) Operating temperature: 0-50? Weight: ?7g Per saperne di più
    € 16,04

  •  EFUEL POWER STRIP WITH USB PORT SK-600009

    EFUEL POWER STRIP WITH USB PORT SK-600009

    EFUEL POWER STRIP WITH USB PORT Features Distributes power from a power supply to five electrical devices Three channels are equipped with switches and orange LEDs for curren up to 10A each Two channels for high current up to 40 Amperes(total) with green LEDs All channels protected by fuse Aluminum body for superior heat dissipation 12 AWG Silicon wire for high current USB Power 5V/1A Input Voltage: 6 – 16V DC Current Limit: Channel 1 & 2: 40 Amps total Channel 3 – 5: 10 Amps each Length of power cable: 350mm Dimension:160x60x41mm Net Weight: 251gram Per saperne di più
    € 31,29

  • MULTI BALANCE BOARD ADAPTOR SK-600056 SK-600056

    MULTI BALANCE BOARD ADAPTOR SK-600056 SK-600056

    MULTI BALANCE BOARD ADAPTOR SK-600056 Cell Count: 2-6s(7.4V-22.2V) Balance Connector Type: HP/PQ, TP/FP, XH, EH CAVO DI COLLEGAMENTO AL CARICA BATTERIA COMPRESO Per saperne di più
    € 15,84

  • SKYRC Skylink for Toro Programable ESC SK-600013-02 SK-600013-02

    SKYRC Skylink for Toro Programable ESC SK-600013-02 SK-600013-02

    KYRC Skylink for Toro Programable ESC SK-600013-02 Description: PC interface for custom ESC programming and updating. In this document we will go over the settings and features that SkyLINK PC Interface program offers to you. Feature: For: SKYRC TORO 1/10 ESC SK-300044 / TORO 1/8 ESC SK-300045 / TORO 1/5 ESC SK-300047 View, change and customize the ESC program options. Download new firmware as it is developed and upload it to you Speed Control. Compatible with Windows Vista, Windows XP, Windows 7 and Windows 8 Include: SKYRC Skylink (1 pc) USB (1 pc) Wire (1 pc) Manual (1 pc) Per saperne di più
    € 7,55

  • GYRO UNIT FOR MINI-Z SK-600007-01

    GYRO UNIT FOR MINI-Z SK-600007-01

    GYRO UNIT FOR MINI-Z This Gyro Unit plugs right into the main board of your MR-03 and will help you keep your MR-03 under control. The Gyro Unit will automatic correct of steering and throttle. Basically it will keep the steering aimed to the global direction, so say your rear tires loose traction and the chassis come to an angle, this will counter steer for you faster than humanely possible. Very cool, and really impressive having the car stable like if it was following a rail on low traction surfaces (wood, tiles). Weight: 1g Wire Length: 80mm Per saperne di più
    € 26,42

  • Tire Sander SK-600072-01  SK-600072-01

    Tire Sander SK-600072-01 SK-600072-01

    SKYRC DC Rubber Tyre Tire Sander 1/10 RC TAMIYA Touring RC Car Tire Features Rubber Tyre sander for the 1/10th touring car class A powerful high torque DC motor with dual metal ball bearings Direction of rotation can be switched to suit left or right hand use The rotation RPM can be adjusted to your liking 8 color coded LED lights to indicate RPM Reverse polarity protection Light-weight aluminum anodized case Rubber mounted feet to minimize vibration Flexible silicone coated power wires, with included banana connector plug Product Specification Input Voltage: DC 6V-15V Minimum Input Current: 10A Case Material: Aluminum Power Supply cable: Silicon Cable with Banana Plug Dimension: 159x70x66mm Weight: 710g Per saperne di più
    € 57,86

Elenco  Griglia 

Articoli da 1 a 10 di 31 totali

Pagina:
  1. 1
  2. 2
  3. 3
  4. 4
per pagina